Home
Products
Sensor
Speed Sensor
Lvdt Sensor
Press Sensor
Eddy Current Sensor
Other Sensor
Filter
Oil Filter
Air Filter
Water Filter
Pump
Oil Pump
Water Pump
Other Pump
Pump Spare Parts
Valve
Globe Valve
Solenoid Valve
Servo Valve
Float Valve
Differential Pressure Valve
Other Valve
Automatic Control
cards & module
Meter
Transmitter
PLC
other
Power Generation Equipment Parts
Steam Turbine Parts
Generator Parts
Boiler Parts
Auxiliary Parts
Insulating Material
Insulating Adhesive & Paint
Insulation Pressed Parts
Insulating Material
Sealing Material
Sealant
Sealing Grease
Sealing Strip
Seal Ring
Others
Bearing
Bearing
Accumulators And Bladders
Accumulators Bladders And Spare Parts
News
About Us
Company Profile
History
Support
Supply Chain
Service
Contact Us
FAQs
/
English
Valve
Servo valve SM4-40(40)151-80/40-10-H919H
Servo valve SM4-40(40)151-80/40-10-H919H is widely used in electro-hydraulic position, velocity, acceleration, force servo systems, and servo vibration generators. It has the advantages of small size, compact structure, high power amplification coefficient, high control accuracy, good linearity, small dead zone, high sensitivity, good dynamic performance, and fast response speed.
inquiry
detail
Steam turbine Servo Valve J761-003A
The servo valve J761-003A is also an excellent equipment servo valve, suitable for electro-hydraulic position, speed, pressure or force control systems that require high dynamic response, providing guarantees for the safe and efficient operation of the system.
inquiry
detail
Sealing Oil Vacuum Oil Tank Float Valve BYF-80
This sealing oil vacuum oil tank float valve BYF-80 uses mechanical ball-float liquid-level controller. It uses automatic oil tank or other containers to supply the oil, so that the oil tank is kept within the liquid-level range. It is mainly used in the single-circuit oil sealing control system vacuum oil-tank of the hydrogen cooling turbo-generator for liquid-level control. It also can be used in the oil-tank supply or the water-tank supply.
Brand: YOYIK
inquiry
detail
AST solenoid valve SV13-12V-0-0-00
AST solenoid valve SV13-12V-0-0-00 is a 2-way, 2-position, poppet type, high pressure, pilot operated, normally open solenoid valve. This valve is used in applications requiring low leakage, such as load holding applications or as a general purpose diverter or dump valve.
inquiry
detail
Servo valve SV4-20(15)57-80/40-10-S451
Servo valve SV4-20 (15) 57-80/40-10-S451 outputs modulated flow and pressure after receiving electrical analog signals. It is not only an electro-hydraulic conversion component, but also a power amplifier component. It can convert small and weak electrical input signals into high-power hydraulic energy (flow and pressure) output. In an electro-hydraulic servo system, it connects the electrical and hydraulic parts to achieve the conversion of electro-hydraulic signals and hydraulic amplification. The electro-hydraulic servo valve is the core of the control of the electro-hydraulic servo system.
inquiry
detail
Hydraulic Pressure Control Valve PCV-03/0560
The Hydraulic Pressure Control Valve PCV-03/0560 is an electro-hydraulic proportional valve designed to regulate the pressure in the hydraulic system in proportion to the added electrical input. It can be used to directly control the pressure in small flow systems, or for pilot control of larger pressure control valves, or for purposes such as pressure control pumps. Before leaving the factory, setting adjustments have been made to ensure high reproducibility between valves. The valve design has a small hysteresis loop and good repeatability. The valve body sealing material is compatible with mineral liquids such as L-HM and L-HFD.
Brand: YOYIK
inquiry
detail
Bellows relief valve BXF-40
The bellows relief valve BXF-40, also known as a pressure reducing valve or differential pressure valve, is composed of a valve body, valve cover, valve seat, valve stem, diaphragm, diaphragm pressure plate, spring, etc. The working medium temperature is 0 to 90 ℃, and the working pressure difference is between 1.0 to 2.5MPA. The main material is cast steel, with flange connection.
Brand: YOYIK
inquiry
detail
Three valve manifold HM451U3331211
The Three valve manifold HM451U3331211 is an integrated three valve group. All possible primary and secondary valves for the automation process industry. The three valve group consists of three interconnected three valves. The role of each valve in the system can be divided into: high-pressure valve on the left, low-pressure valve on the right, and balance valve in the middle.
inquiry
detail
AST solenoid valve Z2805013
The AST solenoid valve Z2805013 belongs to the ETS actuator and is installed on the integrated block. It is mainly used to execute signals sent by superiors and receive tasks. Control the direction of hydraulic flow, solenoid valve Z2805013 is used for the emergency trip control block of the ETS system in the power plant. ETS is a protective device for the emergency trip system of the steam turbine, which receives alarm or shutdown signals from the TSI system or other systems of the steam turbine generator set, performs logical processing, and outputs indicator light alarm signals or steam turbine trip signals.
inquiry
detail
Stainless steel globe throttle check valve LJC series
Stainless steel globe throttle check valve LJC series is a valve that has both stop valve and check valve functions. Its valve stem is not fixedly connected to the valve disc. When the valve stem descends, the valve disc will tightly press against the valve seat, acting as a shut-off valve; When the valve stem rises, it acts as a check valve. On pipelines that require the installation of both globe and check valves or in locations with limited installation locations, the use of globe and check valves can save installation costs and space. Suitable for pipelines with media such as steam, flammable, explosive, heat transfer oil, high-purity, toxic, etc.
Brand: YOYIK
inquiry
detail
EH oil system globe valve SHV20
The EH oil system globe valve SHV20 is used in the EH oil system of thermal power plants and is installed on the integrated block of the energy accumulator. It is suitable for full opening or full closing and does not have the function of regulation and throttling. The EH oil system belongs to a high-pressure system, with high fluid resistance and high force required for opening and closing. It can be operated with specialized tools. Its material selection is stainless steel, corrosion-resistant, and externally threaded connection.
Brand: YOYIK
inquiry
detail
Generator hydrogen cooling system safety valve 5.7A25
The generator hydrogen cooling system safety valve 5.7A25, also known as a relief valve, is a device driven by medium pressure. According to different occasions, it can be used as both a safety valve and a pressure relief valve. The safety valve 5.7A25 is driven by the static pressure of the medium in front of the valve. When the pressure exceeds the opening force, it opens proportionally. It’s mainly used in fluid applications.
Brand: YOYIK
inquiry
detail
1
2
3
4
Next >
>>
Page 1 / 4
Hit enter to search or ESC to close